A floating dock adjusts to fluctuating water conditions – the unique design of the float chambers trap air on the surface of the water for additional buoyancy. As the water levels change the dock raises and lowers.

Download instruction booklet.

Yes, the Connect-A-Dock can be reconfigured, added to, and moved to another location.  The unique connection system is very flexible, and you can reconfigure the same components into many different shapes. (i.e. T, F, L, swim platform, etc.)  Different configurations may require additional float sections and/or connectors.  These can be added at any time.

Yes, the Connect-A-Dock can be attached to existing docks. Depending on your current dock there are multiple methods of attaching.  Please call or e-mail for suggestions.

Freezing temperatures will not harm the Connect-A-Dock; however, with shifting ice we do recommend the removal for the winter months.

Yes, when deciding on the width of your dock system, keep wave considerations in mind. The wider the configuration and with proper anchoring, stability increases.

The Connect-A-Dock comes in the color of Grey Oak. This color reflects sunlight and maintains a safe temperature when coming in contact with bare skin. This polyethylene dock has a UV protection and the color is permanent.

We do not recommend painting the Connect-A-Dock. One advantage of this product is that it never needs painting.

Cleaning docks can be done with a garden hose and whisk broom. If necessary a mild detergent or biodegradable, non-abrasive cleaner can also be used. Get these products at your local automotive, Home & Garden, or discount store.

Yes, the Connect-A-Dock is resistant to oil, gas, and saltwater. In saltwater applications we recommend using stainless steel components or non-corrosive materials when anchoring the dock.

The top surface is slightly domed to prevent water from standing on it. It has a molded in slip resistant wood grain texture to prevent slipping.

t may take on some water; however, it will not sink due to the unique design. If a section would get punctured you should repair or replace the float section.

We have never known of animals chewing through these docks.

Click Here to view the Connect-A-Dock Warranty.

Click Here to view the Connect-A-Dock Warranty.

The lightweight, 86 pound float sections can easily be installed by one person, but two people recomended. Of course, additional help makes lining your dock up with shore and anchoring easier.

Click here to view the Connect-A-Dock instructions.

This will vary depending upon the size of the dock you are installing. It takes approximately 5 minutes per float section plus the anchoring method you choose.

The Connect-A-Dock can be assembled as long and as wide as you wish. The 60'' x 45'' x 10'' 152.4 cm x 114.3 cm x 25.4 cm modular sections allow you to configure to most any size or design.

We recommend a minimum of 45" ( 114.3 cm) wide for installing.

Yes, the Connect-A-Dock can be reconfigured, added to and moved to another location. The unique connection system is very versatile, and you can reconfigure the same components into many different shapes. (i.e.: T, F, L, swim platform, etc.) Different configurations may require additional float sections and/or connectors. These can be added at any time.

Content 8

Freezing temperatures will not harm the Connect-A-Dock; however, with shifting ice we do recommend removal for the winter months.

Each Connect-A-Dock float section can support up to 690 lbs. (313 Kg)

Yes, when deciding on the width of your dock system, keep wave conditions in mind. We suggest a broad configuration and proper anchoring to increase stability.

The walking surface is typically 8" (20.32 cm) above the water. This will vary depending upon the amount of weight placed on your dock.

The Connect-A-Dock comes in the color of Light Gray. This color reflects sunlight and maintains a safe temperature when coming in contact with bare skin. This polyethylene dock has a UV protectant and the color is permanent.

We do not recommend painting the Connect-A-Dock. One advantage of this product is that it never needs painting.

Cleaning docks can be donw with a garden hose and whisk broom. If necessary a mild detergent or biodegradable, non-abrasive cleaner can also be used.  Get these products at your local automotive, Home & Garden, or discount store.

Yes, the Connect-A-Dock is resistant to oil, gas and salt water. In saltwater applications we recommend using stainless steel components or non-corrosive materials when anchoring the dock.

The top surface is slightly domed to prevent water from standing on it. It has a molded in slip resistant wood grain texture to prevent slipping.

Yes, please see the accessories page.

It may take on some water; however, it will not sink due to the unique design. If a section would get punctured you should repair or replace the float section.

We have never known of animals chewing through these docks.

The Connect-A-Dock is shipped in the most economical manner by truck load.

Each float section weighs 200 or 300 pounds and can be easily installed with a minimum of two people.

The Connect-A-Dock can be assembled as long and as wide as you wish.  The 48" x 96" (121.92 cm x 243.84 cm) modular sections allow you to configure to most any size or design imaginable.

Click here to view the Connect-A-Dock instructions.

Each Connect-A-Dock 2000 Series float section can support up to 2500 lbs. (1133.98 Kg)

The walking surface is typically 17" (43.18 cm) above the water.  This will vary depending upon the amount of weight placed on your dock.

Yes, please see the accessories page.

The Connect-A-Dock is shipped via motor freight.