YAKport® Kayak Launch
Whether you're a seasoned paddler or just dipping your toes in the water for the first time, YAKport® makes getting in and out of your kayak, canoe, or stand-up paddle board a breeze. With its wide, stable design, YAKport® can accommodate boards up to 34 inches, ensuring a smooth and secure transition. Easily connect to the Connect-A-Dock® system and other floating or fixed docks. Equipped with launching and docking accessories like the roto grab bar and overhead assist for increased stabilization when entering and exiting the port.
Easy on and off the water
Accommodates most kayak and paddle board sizes up to 34" wide.
Five color options
Match the color of your fixed or floating dock.
Versatile
Suitable for use in fresh or saltwater, adaptable to virtually any type of water environment.
Launch and Load Your YAKport
Shop Kayak Launch Anchoring Kits
model YAKH1000 (Low Profile)
model YAKH2000 (High Profile)
Floating Dock Kit
Floating Dock Kit is best fitted for docks that float on top of the water and fluctuate with the tide. To determine which floating kit you need, measure from the water line to the top of the dock. Use model YAKH1000 (Low Profile) when the water line to top of the Hinge is ~ 18″ or less, and anchor using the side of the port that has three connectors. Use model YAKH2000 (High Profile) when the water line to the top of the Hinge is up to ~ 28″ , and anchor using the side that has two connectors.
When connecting to a floating dock with metal or wooden framing, use the Floating Dock Kit to keep your YAKport connected without excess strain on the hardware.
Kit Includes:
- (2) Hinge Bracket
- (2) Metal Accessory Connector – Male
- (2) Pin and Clip
model YAKF2001
Fixed Dock Kit
When connecting to a fixed dock use the Pole Bracket Sleeve to glide on 2 id inch Galvanized Steel Pipe Schedule 40 (2″ sch 40 pipe not included). The Pole Bracket Sleeve can mount to 1000 Series – Low Profile sockets on the YAKport on the side with three connector slots.
Kit Includes:
- (2) Pole Bracket Sleeve
- (2) Pole Bracket Sleeve
- Not Included in the kit: (2) 2″ Galvanized Steel Pipe Schedule 40
model AKF2001
1000 Series – Low Profile Pole Connector
The versatile Pole Connector slip-fits into the exposed connector sockets with three slots of the YAKport. (Hardware included)
PN-FDA2022MTL
2000 Series Metal Accessory Connector
Mount to a floating Dock on the high profile side of the YAKport®.
model 5×5 Hinge Male – 400432
model 5×5 Hinge Female – 400430
model Pin/Clip – 400433
5 x 5 Hinge – Create a pivot point if needed, between the Kayak launch and your dock
Pin/Clip PN-400433
Replacement Pin and Clip
Attach 1000 Series float sections to other docks with Pin-Hitch.
5 x 5 Plates sold separately
Shop Add-On Accessories
model YAKGHR1020 and YAK1022 – Grab Bar (Matching set) / Overhead Assist
Roto Grab Bars & Overhead Assist
The Roto Grab Bars are available in five colors and can be used with or without the Roto Grab Bar Overhead Assist.
model YAKGHL1020 (sold individually)
YAK Bar
Enter or exit from either end of the kayak launch. Note: Long Grab Bar sold individually – two will be needed for each application – two we required to achieve the setup shown
model 4-5021
1000 Series Metal Accessory Connector
Add accessories to dock sections or connect to other docks.
4.5” x 5.5” x 10” (11.4 cm x 14 cm x 25.4 cm)
PN-950248
2000 Series Metal Accessory Connector
Add accessories on the 2000 Series connector side (two pockets) of the Kayak Launch
7” x 8.125” x 17.125”
model KR1020
Kayak Rack
Conveniently store two kayaks on your dock
6′ x 18.25″ (182.9 cm x 46.36 cm)
Frequently Asked Questions: Kayak Launches
Paddle sport vessels up to 34” wide will fit inside the YAKport kayak launch. There is no length restriction.
YAKport has three connection points on one side and two on the other side for different anchoring options. Typically, the side with two connection points is used to connect to Connect-A-Dock 2000 Series or other floating and fixed high-profile docking systems. The side with three connection points is used to connect to Connect-A-Dock 1000 Series or other floating or fixed low-profile docking systems.
YAKport can be attached to almost any dock style and height. We offer floating and fixed dock attachment kits for high- and low-profile docks. Learn more about our attachment kits online. A Connect-A-Dock dealer can advise based on your unique setup or you can contact customer service.
YAKport is easy to install, but we always recommend working with a Connect-A-Dock dealer to ensure the unit is professionally installed for safety purposes. Watch the 3D video for more installation tips.
YAKport can warm up in the direct sunlight but is generally cool enough to stand on or touch during sunny days. Lighter-colored models absorb less heat than darker colors. YAKport is engineered to resist UV damage to ensure durability and longevity without significant structural impact.
No maintenance is required. YAKport is easily cleanable with a stiff bristle push broom and soapy or non-soapy water. When using soap, use an environmentally safe product. In areas where water freezes, please reference our Winterization Guide.
In environments where water freezes, YAKport kayak launch should be removed from the water and stored flat. Do not store it on its side or upside down. Right side up storage decreases the risk of water and ice causing damage by getting into the underside cavities and vent holes. Read more in the Winterization Guide.
YAKport can be easily cleaned with a stiff bristle push broom and soapy or non-soapy water. When using soap, consider environmentally friendly options to reduce pollution into waters.
Check out docksuppliers.com or contact customer service at info@connectadock.com or call 877-742-3071. You can also contact your local dealer using the dealer locator.
The roto grab bars and overhead assist bar provide a more seamless experience. The notches in the roto grab bars make it easy to use your paddle as leverage to pull/push yourself on/off the unit. The overhead assist bar is an added benefit to pulling yourself on and off the unit and provides a resting point to balance while stepping in and out of the YAKport. The majority of YAKport owners purchase both side and overhead bars.
Basic hardware is included; depending on your anchoring setup, you may need to purchase additional hardware. If you are having your YAKport installed by a dealer, they will bring all required installation pieces.
Design A Dock
Explore the Design A Dock tool to visualize the perfect dock setup before you buy—including the specific parts and accessories needed for your perfect setup.
Find A Dealer
Ready to transform your shoreline? Our network of dealers is here to help. We’re dedicated to uncompromising quality and service at every step. Find a dealer near you now.
